Pressure gauge isolators cylinder bench
Product Description
The power unit is specially designed for various trucks to add different types of snowboards,Hydraulic Gear Pump, provide lifting and swinging functions for the snowboards, Hydraulic Accessories Electrical,and can also choose different rings and different valves.Miniature Hydraulic Valve.
1. For pumps with different flow rates, pressures and motor powers, please check the ordering guide.
2. The motor is based on the gap working system S2 = 2 ~ 4min (continuous working time), so it cannot run continuously.
3. Before installation, the cylinder, tubing, joints and other hydraulic components must be cleaned and free of any impurities.
4. The viscosity of hydraulic oil should be 15-68cst, and it should be clean and free of impurities. It is recommended to use HM46 hydraulic oil.
5. After the system runs for the first time, immediately check whether there is enough oil in the oil tank.
6. The hydraulic oil should be changed for the first 100 hours after the system is used, and the hydraulic oil should be changed every 3,000 hours thereafter.
Product Categories : Old Products